> Paint Solutions / Truck Spray Booths / Auto/Truck Crossflo Spray Booth
Auto/Truck Crossflo Spray Booth
A range of standard models available for a complete automotive/truck paint facility.
Choice of Three Models
The Custom Aire AUTO/TRUCK CROSSFLO spray booth provides a complete automotive and truck painting facility with a choice of three models: REVERSED AIRE FLO, DRIVE-THRU, and STANDARD AIRE FLO. The booth is constructed of 18GA galvanized steel and is easily assembled following AFC instructions. The exhaust fan is capable of maintaining an air flow rate of 16,400 CFM through the booth.
Specifications
DIMENSIONS FOR STANDARD MODELS:
- Inside: 15’0” wide x 9’10” or 11’4” high x 23’0”, 27’0” or 33’0” deep
- Outside: 16’4” wide x 10’0” or 12’0 high x 23’2”, 27’2” or 33’2” deep
- Doors: 10’0” wide x 9’0” or 10’6” high
- Contact AFC for custom sizes and configurations.
Reversed Aire Flo Models
- ECFCRA2714: 27’0″ inside, 27’2″ outside, 14 light fixtures
- ECFCRA3318: 33’0″ inside, 33’2″ outside, 18 light fixtures
Standard Aire Flo Models
- ECFCSA2814: 26’0″ inside, 28’2″ outside, 14 light fixtures
- ECFCSA3418: 32’0″ inside, 34’2″ outside, 18 light fixtures
Drive-thru Models
- ECFCSD2714: 27’0″ inside, 28’2″ outside, 14 light fixtures
- ECFCSD3318: 33’0″ inside, 33’2″ outside, 18 light fixtures
FEATURES INCLUDE:
- 1 – 34″ diameter tube-axial fan with variable pitch, non-sparking blades
- 1 – 5HP open type motor for operation on 208/230/460 VAC, 60Hz, 1 or 3 phase
- One set of Custom Tacky air supply filters and one set of exhaust arrestors
- Fluorescent light fixtures with clear tempered glass with tubes
- 3’0″ x 7’0″ personnel access door
- 6 feet of exhaust stack, roof jack, and weather cap
- Door limit switches and air valve
- Painter’s work station
- Manometer to monitor porosity of arrestors
- Installation hardware, caulking, and door gaskets
- Blueprints and assembly instructions